Cd Device Mode - Arcam AV860 Manuel

CD Device Mode

The CD Device Mode button selects CD as the source.
The button is configured to control the CD functions of
Arcam CD players, although this can be changed (see
"Locking/Unlocking a specific Device Mode" on page
E-39).
2 Toggles power between standby and on.
1 Open/close disc tray.
0...9 Searches for and plays the track
corresponding to the key pressed.
Cycles through the front panel display's
DISP
brightness options.
MODE Cycles through the repeat options (track,
disc, etc.).
7 Fast rewind.
8 Fast forward.
9
Press and release to skip back to the
beginning of the current/previous track
: Press and release to skip forwards to the
beginning of the next track.
Stop playback of a CD
4; Pause and playback of the current track.
In 'normal play' (i.e. the display does not
POP UP
), press the ' and ,
show the letter P
keys to select the track and then stores
MENU
the track.
In 'program play' mode, the MENU key
deletes the stored track.
Navigate setup and CD programme
selection menus.
selects the highlighted file or enters
OK
the highlighted menu on the screen –
equivalent to 'Enter' or 'Select' on some
remote controls.
' Up
< Left
> Right
, Down
+ ' Power on from Standby
CD
+ , Standby from Power on.
CD
AMP Resets remote to AMP mode.
RADIO Plays the programmed tracks.
E-25