Maintenance Intervals; Table Of Maintenance Intervals; Sharpening The Cutting Teeth; Changing The Saw Chain - Grizzly AKS 1820 T Lion-Set Traduction De La Notice D'utilisation Originale

• Only dry wipe the saw chain. After
cleaning, lightly oil the saw chain with
chain oil. Apply individual drops of oil
to the joints and the points of the teeth
on the individual chain links.

Maintenance intervals

Carry out the maintenance work listed
in the table below at regular intervals.
Regular maintenance of your equipment
extends the lifespan of the equipment.
You will also achieve optimum cutting per-
formances and avoid accidents.

Table of maintenance intervals

Machine Part
Komplette Maschine
Accessible screws
and nuts
Chain wheel
Saw chain
Blade

Sharpening the cutting teeth

Leave the resharpening of a saw chain to
a specialist or proceed according to the
instructions for your saw chain sharpener.
Resharpening a saw chain takes practice.
If in doubt, it is preferable to replace the
saw chain.

Changing the saw chain

Never fix a new saw chain on a
worn set of teeth or on a damaged
or worn blade.
Action
Check condition, replace damaged
parts if necessary
Tighten
Check, replace if necessary
Check, oil, sharpen or replace if
necessary
Check, turn, clean, oil
Before
each use





1. Turn off the appliance and, before do-
ing any servicing, remove the battery.
2. Undo the blade fixing screw (
and take off the chain wheel cover
( 6).
3. Take off the old saw chain (
The assembly and tensioning of the new
saw chain are described in the "Assembly
instructions" chapter.
GB
After 10 ope-
rating hours

5)
1).
75