Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Warning! The tines will continue
to turn for a few seconds after
the tool has been switched off.
Do not touch the rotating tines –
injury hazard!
Cutting Blade
The device is equipped with 2 rows of cut-
ting blades, totalling 6 cutting blades in all,
which are easy to change. Both rows of
cutting blades can be inserted as desired
on the left or right of the gears (see
21).
Operating instructions
Always keep a firm grip on the
tool with booth hands and watch
your feet.
The tines may cause an accident.
Be careful while moving back-
wards – danger of tripping!
Do not touch the gearbox (
as it may become hot during
21) -
operation – danger of burns!
To avoid damage to the tool:
• Never lift or drag the tool with the
motor running.
• Use the transport position when
transporting the lawnmower (see
"Working position/Transport posi-
tion").
• Raise the device to transport it
over stairs.
To avoid injuries and damage:
Switch the tool off after working with
it and for transport; disconnect from
the mains and wait for the tines to
stop moving.
• Walk the tool through the soil
at normal pace and in a line as
straight as possible.
• Always work away from the
mains socket. Make sure that the
cable is kept well away from the
working area.
• Always run the extension cable be-
hind you and, after turning, move it
to the side already worked.
• Overload protection: The motor
will cut out immediately if over-
loaded. The tool cannot be used
until it has completely cooled
down again.
Cleaning/maintenance/
storage
Warning! Always return the tool
to the service centre for work not
described in the manual. Only use
original parts.
Switch the tool off, unplug it from the
mains, and wait for the tines to stop
moving before carrying out any main-
tenance or cleaning work on the tool.
Perform regular maintenance and cleaning
on the tool. This will ensure long, reliable
service.
UK
75
Publicité
Table des Matières
