Safety Information; Icons And Symbols - Grizzly AKS 1820 T Lion-Set Traduction De La Notice D'utilisation Originale

Chain speed v ........................max. 5 m/s
0
Weight without battery and
battery charger ..............................3.25 kg
Volume oiltank ............................... 60 cm
Chain bar ........... 8" Oregon 080NDEA318
Chain .............................Oregon 91P033X
Chain pitch...........................3/8" (9,5 mm)
Number of chain drive links
Chain width ................................... 1.3 mm
Teeth of the sprocket chain wheel
Sawing length ............................ca. 20 cm
Acoustic pressure level
(L ) .....................86 dB(A); K
pA
Sound power level
measured ........ 95.8 dB(A); K
guaranteed .............................. 99 dB(A)
Vibration at the handle
(a ) ....................< 2.5 m/s
h
Technical and visual changes may be
made without notice during the course of
development. All dimensions, directions
and information in these instructions for
use are therefore subject to change. No
legal positions based on the instructions
for use can therefore be enforced.
The specified vibration emission value
has been measured in accordance with a
standardised testing procedure and can
be used to compare one power tool with
another. The specified vibration emission
value can all be used for an initial esti-
mate of the exposure.
Warning:
During actual use of the power
tool, the vibration emission value
may differ from the value specified,
depending on the manner of use of
the power tool.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
.................. 33
.......... 6
= 3.0 dB
pA
(L )
WA
= 3.0 dB
wA
; K = 1.5 m/s
2
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
3
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).

Safety information

This section deals with the basic safety
regulations to be observed when working
with the machine.
An cordless pruner
device, which can cause serious or
even fatal injuries with incorrect or
2
careless use. Thus, for your own
safety and the safety of others, you
should always take note of the in-
structions on safety and, in case of
difficulties, consult a specialist for
advice.

Icons and symbols

Symbols used on the device
1 2
8
1 Caution!
2 Read and take note of the operating
manual belonging to the machine!
3 Do not expose the machine to the
rain. Do not allow the equipment to
become damp or operate it in a damp
environment.
is a dangerous
3 4 5
9 10 11 12
GB
6 7
65