Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts; Waste Disposal And Environmental Protection - Grizzly GHS 2842 B Traduction De La Notice D'utilisation Originale

Broyeur silencieux
Masquer les pouces Voir aussi pour GHS 2842 B:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
GB
Maintenance and
cleaning
Leave all work not described in
this manual to an authorised cu-
stomer service centre. Only use
original parts.
Wear hand protection when work-
ing on the blade cylinder.
Switch the shredder off , unplug it
form the mains, and wait for the
blade cylinder to come to a com-
plete stop before working on it.

General cleaning and servicing

Do not spray water onto the
shredder. Electric shock hazard.
Always keep the shredder, wheels
and air vents clean. Use a brush or
cloth to clean it, avoid cleaners and
solvents.
Always check that the shredder and
especially the guards are not worn
down or damaged but fi rmly attached
before use. Check that the nuts, bolts
and screws are tight.
Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
Keep the shredder in a dry place out
of children's reach. Do not cover the
shredder in nylon bags, as moisture
may develop.

Replacement parts

Spare parts and accessories can be ob-
www.grizzly-service.eu
tained at
84
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have fi nished with
them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization lo-
cation. The plastic and metal parts emplo-
yed can be separated out into pure mate-
rials and recycling can be implemented.
Ask your Service Center about this.

Guarantee

We provide a 24-month guarantee on
this unit. This equipment is not suit-
able for commercial use. Commercial
use will invalidate the guarantee.
If you have reason to launch a
claim on guarantee, please call our
service centre. They will give you
further information on the com-
plaints management process.
The guarantee does not cover dam-
age from natural wear, overloading or
improper use. Certain components,
such as the blade cylinder and pres-
sure plate, are subject to normal wear
and are not covered by guarantee.
Guarantee is conditional on adher-
ence to instructions on cleaning and
servicing instructions.
Damage resulting from material or
manufacturing defects shall be rem-
edied by replacement or repair free of
charge.
Our service centre will also repair
parts not covered by guarantee for a
fee. The service centre will be pleased

Publicité

Table des Matières
loading

Table des Matières