Safety Instructions; Symbols - Grizzly AGS 72-3 Lion-Set Traduction De La Notice D'utilisation Originale

Grass-trimming blade
Cutting width .............................. 80 mm
Shrub-trimming blade
Cutting length .......................... 160 mm
Length of blades....................... 200 mm
Distance between teeth... approx. 8 mm
Weight (without telescopic arm)
...........................................approx 0.85 kg
Sound power level (L
guaranteed .............................. 89 dB(A)
Function shrub trimmer
Sound power level (L
measured ...........86,0 dB(A); K
Sound pressure level
(L ) .................... 75,0 dB(A), K
pA
Vibration at handle
(a ) ...................1.942 m/s
h
Function grass trimmer
Sound power level (L
measured ...........82,4 dB(A); K
Sound pressure level
(L ) .................... 76,3 dB(A), K
pA
Vibration at handle
(a ) .....................1.38 m/s
h
Battery (Li-Ion)
Nominal voltage ................7,2 V
Loading time ........................... approx. 3 h
Charger ...................BI12TA-095080-AdV
Voltage input ..........
Input current ..................................... 0,5 A
Voltage output................................... 9,5 V
Recharging current ....................... 800 mA
Protection class ..................................
Protection category............................IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
)
WA
)
WA
= 3 dB
WA
= 3 dB
pA
, K= 1.5 m/s
2
)
WA
= 3 dB
WA
= 3 dB
pA
2 , K= 1.5 m/s
2,0 Ah
100-240 V~, 50/60 Hz
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used. Safe-
ty precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
2
is turned on but is running idle).

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Before
using the unit, carefully read
2
through the instruction manual
and familiarise yourself with all
of its controls.

Symbols

Symbols on the unit
Attention! Remember that the
II cutting equipment will con-
tinue to move after switching
the unit off.
Do not use the unit during rain,
bad weather damp surroundings or
on wet grass or hedges.
Before using for the first time,
carefully read through the
user manual.
GB
89