Fitting The Recaro Seat - RECARO C 6000 Notice De Montage

3.10 Fitting the RECARO seat

1. Lift the seat carefully into the vehicle.
Caution:
Please note that the seat can weigh up to 50 kg. Use lifting or carrying equipment whenever
necessary.
Ensure that the seat is not damaged by the lifting or carrying equipment.
Ensure that the hose/cable harness is not damaged.
Important note:
To simplify installation, position the backrest in the vertical position.
W
2. Connect the two electrical connectors (1) located on the side of the console with the vehicle electrical
connections.
X
1
RECARO Automotive Seating
1 Vehicle electrical connections
1 Console screws, front
2 Console screws, rear
2
K0329
Page 21