Promac 213A Mode D'emploi page 7

II PARTS
1. Assembly the Column
* Place column assembly on base and align holes in
column support with holes in base.
* Secure the column with four or three bolts and
washers provided.
2. Install table bracket
2‐1 Take off collar and rack
2‐2 Install table bracket together with rack. Fig. 2.
2‐3 Install collar and fix it firmly. Fig.3.
3. Install bracket handle and clamp bolt. Fig. 4, 5.
Fix handle with attached set screw.
Install clamp bolt to fix table bracket.
7/47
213A