Promac 213A Mode D'emploi page 3

GB ‐ ENGLISH
Operating Instructions
NOTE:
It is advisable for user to read this
Instruction Manual in order to avoid
accident. If the operation method used in
this drilling machine us the same as the
method used in ordinary machine,
possible hazard may occur during the
process. Therefore, it is imperative that
user should pay extra caution and make
sure that his operating method is correct.
Slight negligence to any of the safety
measures will certainly cause accident to
the user.
The manufacturer designed this machine
especially focusing on its scheduled using
scope. Therefore, it is advisable that the
user should pay attention not to exceed
the said using scope. Also, do not make
any modification to the spare parts and
structure of the machine.
If you have any question regarding and
operating method of this machine and
Cannot find the solution in the Instruction
Manual, please contact your vendor
directly.
Correct Operation Instruction of This
Machine
1 For your own safety, do not start the
said machine before reading the
Instruction Manual carefully. One of
the necessary safety measures is to
understand its operation principle and
operation method first.
2. Do not alter any of the protective
pieces in order to maintain its
completeness
3. Plug the fan plug for power supply into
the socket with earth wire. If your
socket dose not have an earth wire,
then connect the earth terminal of this
machine.
4. Before starting this machine, it is
imperative to take away all wrenches
and latch handle not connected to the
machine. Also, your should make it a
habit to check the surrounding of the
said machine every time before suing,
to see there is any small spare part
around that may cause running fault
( breakdown).
5. Before installing the machine, clean
your working ground on order to
prevent any accident occurring.
6. Do not use this machine in a highly
dangerous place. Also, do not install
the machine in a humid or water
leaking place. During the process of
work, the user should make sure to
keep its working ground clean anytime.
7. Do not let any unauthorized or
ignorant person or children near the
said machine, and should be sure to
keep a proper distance from the
machine anytime.
8. Put a safety lock on the door of your
working ground in order to prevent
children from starting the machine.
9. Avoid overloading the machine. Also,
for your own safety, be sure to abide to
its using scopes.
3/47