Pentair IntelliFlo VF Manuel D'installation Et D'utilisation page 43

41
Features Menu (Continued)
M.O. Flo Setup
To access the M.O. Flo menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. "Pool Data" is displayed.
3. Use the Up and Down arrow buttons to scroll to the "Features" menu item. Press the Select button
to select it. "Feature 1" is displayed. Use the Up and Down arrow buttons to scroll to the M.O.
Flo menu item. Press the Select button to select it.
a)
To choose whether the M.O. Flo feature will be Disabled or Enabled:
Press the Select button to access the "Activation" setting (Default
Disabled). To change the setting, use the up Up and Down arrow buttons
to toggle between the Disabled and Enabled options. Press the Select
button to select one. Go to step 5, below.
b)
To set the flow for the M.O. Flo feature: U
buttons to scroll to the "Set Flow" setting. Press the Select button to
access it (Default 12m
c)
To set the run time for the M.O. Flo feature: U
arrow buttons to scroll to the"Set Run Time" setting. Press the Select
button to access it (Default 1 minute, or 0:01). To change the setting, see
step 4, below.
d)
To set the interval time for the M.O. Flo feature: U
to scroll to the "Set Interval Time" setting. Press the Select button to access it (Default 1
hour, or 01:00). To change the setting, see step 4, below.
IntelliFlo VF Installation and User's Guide
/h). To change the setting, see step 4, below.
3
®
M.0. Flo 7:29 M.O. Flo
Disabled 12m³/h
Activation Set Flow
Enable/ Disable Set Flow
se the Up and Down arrow
se the Up and Down
® ®
7:29 M.O. Flo 7:30
0:01
Set Run Time
Set Run Time
se the Up and Down arrow buttons
®
M.O. Flo
7:31
1:00
Set Interval Time
Set Interval Time
®
Features 7:22
M.O.Flo