Feature 3-9 Setup - Pentair IntelliFlo VF Manuel D'installation Et D'utilisation

39
Features Menu (Continued)

Feature 3-9 Setup

To access the Features 3-9 menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. "Pool Data" is displayed.
3. Use the Up and Down arrow buttons to scroll to the "Features" menu item. Press the Select button
to select it. "Feature 1" is displayed. Use the Up and Down arrow buttons to scroll to the Feature
3-9 menu items. Press the Select button to select one.
a)
To choose whether the feature will be Disabled or Enabled:
the Select button to access the "Activation" setting (Default Disabled).
To change the setting, use the up Up and Down arrow buttons to toggle
between the Disabled and Enabled options. Press the Select button to
select one. Go to step 5, below.
b)
To set the flow for Feature 3-9: U
Flow" setting. Press the Select button to access it (Default 12m
see step 4, below.
c)
To set the start time for Feature 3-9: U
the "Set Start Time" setting. Press the Select button to access it (Default: see table on
page 37). To change the setting, see step 4, below.
d)
To set the stop time for Feature 3-9: U
the "Set Stop Time" setting. Press the Select button to access it (Default: see table on
page 37). To change the setting, see step 4, below.
IntelliFlo VF Installation and User's Guide
®
Feature 3 4:50
Disabled
Activation
+
+
se the Up and Down arrow buttons to scroll to the "Set
®
Feature 3 5:18
En ab le d
Activation
se the Up and Down arrow buttons to scroll to
se the Up and Down arrow buttons to scroll to
Press
Features
Feature 3
/h). To change the setting,
3
®
5:22