Manual Flow Mode; To Adjust The Speed And Flow - Pentair IntelliFlo VF Manuel D'installation Et D'utilisation

15
Manual Mode (Continued)

Manual Flow Mode

4. Press the Start/Stop button to stop the pump. Use the Up and Down arrow buttons to scroll to the
"Set FLOW" menu item. Press the Select button to select it.
5. To change the setting, press the Left and Right arrows to select which digit to modify, then use
the Up and Down arrows to change the selected digit.
6. When you are done, press the Enter button to save the changes. To cancel any changes, press the
Escape button to exit edit mode without saving.
MANUAL FLOW
15.W
POWER
RUNNING
7. Press the Start/Stop button. If you pressed the Enter button in step 6, "MANUAL FLOW" will
appear in the top left corner of the display, indicating that the pump is now in Manual Flow Mode.
8. Use the Up and Down arrow buttons to view the screens below:
• POWER (Watts): Displays power to the motor shaft in continuous watts
• ACTUAL SPEED (RPM): Displays pump speed in RPM
• FLOW (m
• Set SPEED (RPM): Allows you to set IntelliFlo to run at a continuous pump speed
• Set FLOW (m
to change speed to manage the flow rate based on system changes
Note: IntelliFlo's sensors—with the exception of the flow sensor— will not work in Manual Mode, so
warning alarms, such as the Suction Blockage alarm, will not operate.

To adjust the Speed and Flow:

1. Be sure that the green power LED is on.
2. Press the Manual button (LED on).
3.
a) To set the speed:
Press the Select button to select it. The flow values can be set from 4 to 29 m
(default 12m
IntelliFlo VF Installation and User's Guide
® ®
12:15 MANUAL FLOW 12:15
1700.RPM
ACTUAL.SPEED
RUNNING
/h): Displays actual flow as long as the IntelliFlo is in Manual Flow Mode.
3
/h): Allows you to set IntelliFlo in Manual Flow Mode to allow the pump
3
Use the Up and Down arrow button to scroll to the "Set SPEED" screen.
/h). To change the setting, see step 4 below.
3
®
MANUAL FLOW 12:15 MANUAL FLOW
14m³/h 1000.RPM
FLOW Set SPEED
RUNNING RUNNING
® ®
12:15 MANUAL FLOW 12:15
14m³/h
Set FLOW
RUNNING
per hour
3