Intelliflo Drive Assembly And Control Panel; Operator Control Panel Features - Pentair IntelliFlo VF Manuel D'installation Et D'utilisation

9
IntelliFlo VF Drive Assembly and Control Panel
The IntelliFlo drive consists of an operator control panel and system electronics that convert the incoming
230 volt single phase power to 3 phase variable frequency to drive the motor. The drive microprocessor
controls the motor by changing the frequency of the current it receives together with changing the voltage
to control the rotational speed.
Operator Control Panel,
buttons and Liquid Crystal

Operator Control Panel Features

• Backwash and Rinse — Informs the user when and how to backwash filter media
• Vacuum — Can be preset using duration and flow parameters to save energy
• Filter — Allows pump to run at peak efficiency, saving users up to 90% in energy cost, based on
a pool size up to 55 m
• Feature — Ten feature modes can be programmed to control filtration duration, start and stop
time, and frequency for cleaners, water features, spas, and waterfalls
• Manual — Allows the user to override all programming and run the pump using RPM or flow
(m /h) control parameters
3
IntelliFlo VF Installation and User's Guide
Display (LCD)
(15,000 US gallons), one turn per day with a 24 hour cycle
3
IntelliFlo VF Drive Assembly