Priming Setup Example - Pentair IntelliFlo VF Manuel D'installation Et D'utilisation

12

Priming Setup Example

The following example illustrates the steps to set up Priming Mode. The control panel buttons are pictured
below to help you become familiar with their appearance and function.
To set up the Priming Mode flow rate and time:
1. Be sure that the green power LED is on and the pump is stopped. If the
pump is running, press the
2. Press the
3. Press the
4. Press the
Priming Flow" is displayed. Press the
5. To change the Max Priming Flow setting, press the
arrows to select which digit to modify.
• Press the
6. When the desired value is displayed, press the
the changes.
• Press the
7. Use the
"System Priming Time." Press the
8. To change the Max Priming Time setting, press the
arrows to select which digit to modify.
• Press the
9. When the desired value is displayed, press the
the changes.
• Press the
IntelliFlo VF Installation and User's Guide
Start/Stop button to stop it.
Menu button. "Pool Data" is displayed.
Down arrow to scroll to the "Priming" menu item.
Select button to select the "Priming" menu item. "Max
Up and Down arrows to change the selected digit.
Escape button to exit edit mode without saving.
Up and Down arrows to scroll to "Max Priming Time" or
Up and Down arrows to change the selected digit.
Escape button to exit edit mode without saving.
Select button to select it.
Left and Right
Enter button to save
Select button to select it.
Left and Right
Enter button to save
Priming Setup
MENU 14:09
Pool Data
MENU 14:09
Priming
Priming 14:09
13 m³/h
Max Priming Flow
Priming 14:09
0013 m³/h
Max Priming Flow
Priming 14:09
0013 m³/h
Max Priming Flow
Priming 14:09
0023 m³/h
Max Priming Flow
Priming 14:09
0023 m³/h
Max Priming Flow
Priming 14:09
0020 m³/h
3X
Max Priming Flow
Priming 14:09
20 m³/h
Max Priming Flow
Priming 14:09
15. MIN
Max Priming Time
Priming 14:09
0. MIN
S y s t e m P r i m i n g T i m e
MENU 14:09
Priming