Introduction; Items Supplied - Siemens SITRANS FUS1010 IP65 NEMA 4X Instructions De Service

Introduction

1.1 Introduction
This Quick Start Guide is for the Siemens SITRANS FUS1010 IP65 (NEMA 4X), FUH1010
IP65 (NEMA 4X), FUE1010 IP65 (NEMA 4X) Dual Channel/Path flow meters and the
FUH1010 IP65 (NEMA 4X) Interface Detector. It illustrates a typical setup using D-Series
sensors in the Reflect Mode (for Direct Mode see Operating Instruction manual). These
procedures can also be applied to other single and multi-channel models as well.
To use the Siemens Si-Ware program to assist in flow meter installation download the
program at [www.siemens.com/siware].
Note
This Quick Start Guide applies to the following FUS1010, FUH1010 and FUE1010 IP65
(NEMA 4X) operating systems: Version 3.03.00 and later / Version 5.03.00 and later.
1.2

Items supplied

● SITRANS FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Transmitter
● SITRANS F Literature CD
● Quick Start Guide
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 07/2014, A5E03086486-AD
Note
For additional items refer to your packing slip.
1
7