Navigating The Menu - Siemens SITRANS FUS1010 IP65 NEMA 4X Instructions De Service

7. Connect power cables to the appropriate power source (90-240 VAC @ 50-60 Hz or 9-36
3.3

Navigating the Menu

Menu Navigation and Initial Power-up
Before you can navigate the menu you must first power-up the flow meter. Follow the
instructions below to ensure safe connection of power to the meter and then proceed to the
menu navigation.
NOTICE
Power Supply Damage
Improper power connections will damage power supply.
Ensure that all AC or DC power supply connections are properly connected to the
appropriate power source (100-250 VAC @ 50/60 Hz or 9-36 VDC).
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 07/2014, A5E03086486-AD
Note
If analog input is used for temperature, this will take priority over clamp-on RTD
measurement.
WARNING
Electrical Shock Hazard
Certain parts inside the device carry dangerous high voltage and may result in electric
shock, or serious personal injury.
The transmitter must be grounded and the top cover closed before applying power to
the device.
NOTICE
Power Supply Damage
Improper power connections will damage power supply.
Ensure that all AC or DC power supply connections are properly connected to the
appropriate power source (100-250 VAC @ 50/60 Hz or 9-36 VDC).
VDC). Close transmitter top cover.
Connecting
3.3 Navigating the Menu
27