Siemens SITRANS FUS1010 IP65 NEMA 4X Instructions De Service page 25

8. Replace access cover. Make sure Keypad Enable switch is in the "Enable" position (see
9. If installing a Temperature Sensor board, go to Wiring Temperature Sensor to Transmitter
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 07/2014, A5E03086486-AD
below).
①
Keypad Enable Switch
(Page 24). If not, proceed to Navigating The Menu (Page 27).
Connecting
3.2 Transmitter Wiring
23