Commissioning - Siemens SITRANS FUS1010 IP65 NEMA 4X Instructions De Service

Commissioning

4.1 Commissioning
Note
Refer to [Programming the Transmitter] (Page 31) if needed.
1. Scroll down to [Install Sensor] and press <Right Arrow>.
2. Scroll down to [Install Complete]. Press the <Right Arrow> and select [Install]. Press
3. Observe the Measured Vs window and verify a correct sound velocity measurement (if
4. Press the <Down Arrow> to accept sound velocity value.
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 07/2014, A5E03086486-AD
<ENTER>. The flow meter will go through its drives.
Figure 4-1 Final Setup
Figure 4-2 Measuring Flow
known).
4
47