Siemens SITRANS FUS1010 IP65 NEMA 4X Instructions De Service page 38

Connecting
3.4 Programming the Transmitter
①
②
Figure 3-7
Sensor Selection
The following is a typical sensor selection procedure.
1. Press <Left Arrow> to return to Main Menu. At the [Meter Type], press the <Right Arrow>
and then <ENTER>.
2. The [Channel Setup] menu will appear.
3. Press the <Down Arrow> to select [Install Sensor].
4. Press the <Right Arrow> to [Sensor Model]. Press <Right Arrow> and scroll to select the
sensor model number on the sensor label.
36
Hi Precision sensor model number
Sensor size
Hi Precision Sensor Label
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 07/2014, A5E03086486-AD