Inflalting Tube-Type Tyres; Mounting And Demouting Motorcycle Tyres - CTC MID TIER Manuel De L'opérateur

5.6-1
36
Operations
5.6 Inflating tube-type tires
To inflate the tire unlock the rim and start inflating while
pressing the valve towards the inside. This is necessary
to avoid air pockets forming between tube and tire (Fig.
5.6-1).
Ensure that the tire is correctly centered on the rim
and complete inflation as described in section 5.3.
5.7 Mounting and demounting
motorcycle tires
To mount and demount motorcycle tires it is necessary
to utilize the optional motorcycle adaptors ( 4 piece
EAA0329G20A).
The bead-breaking, mounting and demounting technique
is the same as per car tires.
MOTORCYCLE RIMS MUST ALWAYS BE
CLAMPED FROM THE OUTSIDE. AIR PRESSURE
MUST NOT EXCED 10 BAR (140 PSI) WHEN
CLAMPING MOTORCYCLE RIMS
Operator's Manual MID TIER
Car Tire Changer