5.1-5
5.1-6
5.1-7
28
Operations
• Insert the bead lifting tool under the bead and over
the support of the mount/demount tool. Lift the bead
onto the mounting finger. To facilitate this operation,
press with left hand on the bead in position
diametrically opposite to that of the tool. If desired,
the bead lifting tool can be removed after lifting the
bead onto the finger (Fig. 5.1-5).
• Rotate the turntable clockwise and at the same time
push down on the tire sidewall to move the bead into
the drop-center of the rim (Fig.5.1-6).
• Repeat the process for removing the lower bead. With
left hand, lift the bead in position diametrically opposite
the tool to keep it in the drop center (Fig. 5.1-7).
Move the swing arm aside and remove the tire.
Operator's Manual
MID TIER
Car Tire Changer