Controls - CTC MID TIER Manuel De L'opérateur

4.1-1
4.1-2
4.1-3
22
Layout

4.1 Controls

Before operating the machine ensure that you have well
understood the operation and function of all the controls
(Fig. 4.1-1).
• Press down and release, WITH LEFT FOOT, the
first pedal from the left: the clamps of the turntable
will retract. Do it again: the clamps will expand. If
you press the pedal prior to the end of the stroke
and release, the clamps may be stopped in any
position.
• Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the second pedal from the left:
by doing this you operate the bead breaker blade
and the arm will move towards the machine. Release
the pedal: the bead breaker blade will retract.
• Press down and hold, WITH RIGHT FOOT, the first
pedal from the right: the turntable turns clockwise.
Lift the pedal and the turntable turns counter-
clockwise.
DANGER OF LEG TRAPPING
• The lock handle enable the mount/demount tool to
be locked in the working position. Lower the lock
handle to unlock (Fig. 4.1-2) the vertical slide, lift
the handle to lock (Fig. 4.1-3).
• Turn the adjustment knob (1, Fig. Fig. 4.1-1) for
positioning mount/demount head according to rim
diameter.
Operator's Manual MID TIER
Car Tire Changer