How To Clean Interacoustics Products; Concerning Repair; Warranty - Interacoustics AS608 Instructions D'utilisation

4.2 How to clean Interacoustics Products

If the surface of the instrument or parts of it are contaminated, it can be cleaned using a soft cloth
moistened with a mild solution of water and dish washing cleaner or similar. The use of organic solvents
and aromatic oils must be avoided. Always disconnect the USB cable during the cleaning process, and be
careful that no fluid is entering the inside of the instrument or the accessories.
• Before cleaning always switch off and disconnect from power
Use a soft cloth lightly dampened with cleaning solution to clean all exposed surfaces
•
• Do not allow liquid to come in contact with the metal parts inside the earphones / headphones
Do not autoclave, sterilize or immerse the instrument or accessory in any fluid
•
Do not use hard or pointed objects to clean any part of the instrument or accessory
•
• Do not let parts that have been in contact with fluids dry before cleaning
Rubber ear-tips or foam ear-tips are single use components
•
Recommended cleaning and disinfection solutions:
Warm water with mild, nonabrasive cleaning solution (soap)
•
Procedure:
• Clean the instrument by wiping outer case with a lint free cloth lightly dampened in cleaning
solution.
Clean cushions and patient hand switch and other parts with a lint free cloth lightly dampened in
•
cleaning solution.
Make sure not to get moisture in the speaker portion of the earphones and similar parts
•

Concerning Repair

Interacoustics is only considered to be responsible for the validity of the CE marking, effects on safety,
reliability and performance of the equipment if:
1. assembly operations, extensions, readjustments, modifications or repairs are carried out by
authorised persons,
2. a 1 year service interval is maintained
3. the electrical installation of the relevant room complies with the appropriate requirements, and
4. the equipment is used by authorised personnel in accordance with the documentation supplied by
Interacoustics.
The customer shall reach out to the local distributor to determine the service/repair possibilities including
onsite service/repair. It is important that the customer (through local distributor) fills out the RETURN
REPORT every time when the component/product is sent for service/repair to Interacoustics.

4.3 Warranty

INTERACOUSTICS warrants that:
The AS608 is free from defects in material and workmanship under normal use and service
•
for a period of 24 months from the date of delivery by Interacoustics to the first purchaser.
Accessories are free from defects in material and workmanship under normal use and service
•
for a period of ninety (90) days from the date of delivery by Interacoustics to the first purchaser.
If any product requires service during the applicable warranty period, the purchaser should
communicate directly with the local Interacoustics service centre to determine the appropriate repair
facility. Repair or replacement will be carried out at Interacoustics' expense, subject to the terms of this
warranty. The product requiring service should be returned promptly, properly packed, and postage
prepaid. Loss or damage in return shipment to Interacoustics shall be at purchaser's risk.
AS608 - Instructions for Use - EN Page 22