How To View The Display; Playback; Searching For A Desired Song/Title - Alpine iDA-X100M Mode D'emploi

How to View the Display

<iPod (USB connected) screen display example>
1
5
6
1 Mode display
2 Song title/Episode title/Audiobook title
3 Artist title/Podcast title
4 Album title/Release date
5 Artwork screen
6 Elapsed time
7 Remaining time for playing
8 Calendar/Time
<iPod (Connected via Full Speed™) screen display
example>
1
5
1 Mode display
2 Song title/Episode title/Audiobook title
3 Artist title/Podcast title
4 Album title/Release date
5 Elapsed time
6 Remaining time for playing
7 Calendar/Time
• Artwork contained in the iPod can be displayed only if connected
through USB.
• When playback time reaches 100 minutes, "00'00" is displayed.

Playback

1
Press SOURCE to switch to the iPod or iPod 2 mode.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
3
To pause playback, press
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
iDA-X100M, it will continue playing after the connection.
• Podcasts or audiobooks may have several chapters. The chapters can
be changed by pressing
10
-EN
2
3
4
7
8
2
3
4
6
7
/ .
or .

Searching for a desired Song/Title

An iPod can contain thousands of songs. The unit for this reason can
make various searches using the search function as shown below.
Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/
Song search mode's individual hierarchy, you can narrow down your
search as shown in the table below.
Hierarchy 1 Hierarchy 2
Playlists Songs
Artists Albums
Albums Songs
Podcasts Episodes
Audiobooks —
Genres Artists
Composers Albums
Songs —
• You can select your preferred search mode. Refer to "iPod Search
Mode Setting" (page 23).
• For example, if the selected artist has only one album, the song
search mode is selected immediately, skipping the album search
mode.
For example: Searching by Artist name
The following example explains how an ARTIST search is
performed. Another search mode can be used for the same
operation, although the hierarchy differs.
1
Press /ENTER to activate the Menu Select mode.
2
Rotate the Double Action encoder to select
"Artists", and then press
The artist search mode is activated and an artist name is
displayed.
3
Rotate the Double Action encoder to select the
desired Artist, and then press
The album search mode is activated and an album name is
displayed.
Pressing and holding
play back all songs of the selected artist.
4
Rotate the Double Action encoder to select an
album, and then press
The song search mode is activated and a song name is
displayed.
Pressing and holding
play back all songs of the selected album.
5
Rotate the Double Action encoder to select a
song and press /ENTER.
The selected song is played back.
Hierarchy 3 Hierarchy 4
— —
Songs —
— —
— —
— —
Albums Songs
Songs —
— —
/ENTER.
/ENTER.
/ENTER for at least 2 seconds will
/ENTER.
/ENTER for at least 2 seconds will