Displaying The Calendar/Time; Radio; How To View The Display - Alpine iDA-X100M Mode D'emploi

4
Rotate the Double Action encoder to select year,
month, day, hour or minutes to be set.
5
Press /ENTER.
The year setting mode is activated, and the year blinks.
(When "year" is set)
6
Rotate the Double Action encoder to set year, and
then press /ENTER.
The setting for year is complete. (When "year" is set)
7
Repeat steps 4 to 6 above to set month, day, hour
and minutes.
8
Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.

Displaying the Calendar/Time

Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return
to normal mode.
• Selecting any tuner or iPod function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• If an HD Radio Tuner is connected, text information can be
displayed. Refer to "Changing the Display (HD Radio mode only)"
(page 9).
• If an XM receiver is connected, the Auxiliary Data Field can be
displayed. Refer to "Setting the Auxiliary Data Field Display"
(page 28).
• If an iPod is connected via USB, the album cover screen can be
displayed. Refer to "Changing the Display" (page 12).
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor

Radio

Double Action encoder
SOURCE
TUNE/A.ME
BAND
This unit cannot receive HD Radio™ signals (digital terrestrial radio).
In order to activate the digital radio functions described below, an
optional HD Radio Tuner module must be connected through the
Ai-NET bus.

How to View the Display

<Radio screen display example>
1
2
3
1 Mode display
2 Preset number
3 Volume
4 Tuning mode
5 Frequency
6 Calendar/Time
PRESET VIEW
/ENTER
4
5
6
7
-EN