Changing The Display (Hd Radio Mode Only) - Alpine iDA-X100M Mode D'emploi

2
Press /ENTER to display the Program Type screen.
3
Rotate the Double Action encoder to select a
program, and press
The selected program is received.
Program Service example:
Multicast Radio Station Program No.
88.8MHz No.1
88.8MHz No.2
88.8MHz No.3
88.8MHz No.8
Changing the Display (HD Radio mode
only)
Press VIEW.
Every time VIEW is pressed changes the display.
Song title Station Call
Artist title Letter *
Album title
Frequency
* You can set a long or short HD Radio station name. Refer to "HD
Radio Station Call Setting" (page 23).
/ENTER.
Program Service
MPS: Main Program Service
SPS: Supplemental
Program Service
SPS: Supplemental
Program Service
·
·
·
SPS: Supplemental
Program Service
Calendar/ Song title
Time Artist title
Album title
Frequency
®
iPod
SOURCE
Double Action encoder
/ENTER
/
When an iPod is connected to the iDA-X100M by using the proper
cable, the controls on the iPod are not functional.
The iPod is connected two different ways depending on the iPod model.
The USB connection is designed for the newest iPods. For older iPods,
use the FULL SPEED™ connection cable (KCE-422i).
• Only 5th generation iPod and iPod nano can be connected
via a USB device.
• If an iPod is connected via USB, the alphabet skip function
and the artwork screen can be displayed.
• If an iPod is connected via Full Speed™ (KCE-422i), set
AUX+ Setup to OFF. AUX+ cannot be used if an iPod is
connected (refer to "Setting the AUX+ Mode" on page 21).
• If the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from Bluetooth Box while turning ACC to
OFF.
About iPods usable with this unit
• The unit can be used with the following iPod.
<USB connected>
Fifth generation iPod
First generation iPod nano
Second generation iPod nano
<Connected via Full Speed™>
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
• If the unit is used with iPod software versions of iTunes later
than 7.4.3.1, correct function and performance are not
guaranteed.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The usage of iPod Shuffle with this unit is not supported.
• This unit does not support iPod's video playback function.
VIEW FUNC./SETUP
9
-EN