Protecta VIPER LT Manuel D'instruction page 2

WARNING: This product is part of a personal fall arrest or restraint system. The user must follow the
manufacturer's instructions for each component of the system. These instructions must be provided to the
user of this equipment. The user must read and understand these instructions before using this equipment.
Manufacturer's instructions must be followed for proper use and maintenance of this equipment. Alterations or
misuse of this product or failure to follow instructions may result in serious injury or death.
IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application,
contact Capital Safety.
IMPORTANT: Before using this equipment, record the product identifi cation information (see Figure 2) in the
Inspection and Maintenance Log at the back of this manual.
DESCRIPTION:
The Viper™ LT rope grab is a manual rope grab intended as fall arrest or restraint system. The rope grab provides
a portable connection point on a 12.5 mm rope.
Figure 2 – Viper™ LT Rope Grab and Rope System Components
B
A - Identifi cation B - Cam/Clamp C - Pivot Pin D - Body E - 12.5mm Rope Lifeline
A: Identification
Up
CE 1019
12,5 mm
MMYY
EN353-2, EN358
MM
Description of Markings
The arrow on the body must point upwards and in the same direction as the
top anchor connection of the rope.
ISO 9001 quality assurance system monitoring.
Read these instructions before using the Rope Grab.
Rope diameter.
Date Rope Grab was manufactured: month and year.
CE Personal Protection Equipment Standards for this device.
E
D
D
A
C
C
B
2