Adjusting The Delay For The External Amplifi Er; External Audio Sources; Connecting External Audio Sources; Switching Aux Inputs On (Auxiliary) - Blaupunkt Bremen MP78 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Amplifi er / Sub Out
Adjusting the delay for the
external amplifi er
External amplifi ers generally require some
time until they have stabilised after switch-
on and provide a fl awless playback. To
avoid disturbances during the playback af-
ter switch-on, you can adjust a delay of the
playback via the external amplifi er of up to
7 seconds. During this time, the external
amplifi er is muted.
u
Press the MENU button A.
u
Press the NEXT button 2.
u
Press the "Various Settings" softkey
:.
The "Various" menu is displayed.
u
Press the "Amplifi er" softkey 9.
u
Press the "Delay" softkey ;.
button @ or the
u
Press the
or
button > to adjust the delay be-
or
tween 1 and 7 seconds.
When you have fi nished making your
changes,
u
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
160
02_BREMEN_MP78_gb.indd 160

External audio sources

External audio sources
Connecting external audio
sources
External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device via 2
rear AUX inputs:
1.
Via the AUX-1 input (chamber C3 if no
CD changer is connected to the de-
vice).
2. Via the AUX-2 input (chamber D).
Notes:
An adapter cable is needed to con-
nect an external audio source via the
AUX-1 input. You can obtain this ca-
ble (Blaupunkt no.: 7 607 897 093)
from your Blaupunkt dealer.
As soon as the AUX inputs are switched
on, they can be selected with the
SOURCE button 4 (to switch on the
AUX inputs, please read the follow-
ing section). The display then shows
"AUXILIARY 1" or "AUXILIARY 2".
Switching AUX inputs on
(Auxiliary)
For external audio sources to be played via
the AUX inputs, they must be switched on
in the settings.
u
Press the MENU button A.
u
Press the softkey "Aux Settings" :.
The "Aux" menu is displayed.
To switch the AUX-1 or AUX-2 input on or
off,
u
press the softkey "Auxiliary 1" ; or
"Auxiliary 2" 6.
04.07.2008 10:17:35 Uhr

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7 648 013 310

Table des Matières