Switching On/Off; Switching On/Off With The On/Off Button; Switching On/Off Using The Vehicle Ignition; Switching The Device Off Using The Detachable Control Panel - Blaupunkt Bremen MP78 Mode D'emploi

Switching on/off

There are various ways of switching the de-
vice on/off:
Switching on/off with the On/Off
button
u
For switch-on, press the On/Off but-
ton 3.
The device switches on.
u
To switch off the device, press and hold
down the On/Off button 3 for longer
than 2 seconds.
The device switches off.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Switching on/off using the
vehicle ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle's ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing the On/Off button 3.
Switching the device off using
the detachable control panel
u
Detach the control panel.
The device switches off.

Switching demo mode on/off

The device is supplied from the factory with
demo mode switched on. In demo mode, an
animation plays on the display that shows
the most important functions of the device.
02_BREMEN_MP78_gb.indd 101
Switching on/off
The animation is shown for approx. 16 sec-
onds after the last activation of the button.
Pressing any button interrupts the anima-
tion and returns to the display of the current
audio source.
To switch the demo mode on or off,
u press the MENU button A for longer
than 4 seconds (until a confi rmation
beep sounds).

Timeout function

The device features a time-out function
(time window).
For example, if you press the MENU but-
ton A and select a menu item, the device
switches back to the display of the audio
source after approx. 16 seconds after the
last button activation. The settings per-
formed are saved.
In the Audio menu ("Audio Settings") and
during the update of the device software,
the Timeout function is not active. Exit the
Audio menu by pressing the MENU A or
OK button B again, if necessary.

Welcome text (Turn On Text)

You can adjust the display of the welcome
text that is shown on the display during the
witch-on animation.
Switching the welcome text on/off
The welcome text is factory set to be
switched off and is not displayed when
switching on the device.
To switch the welcome text on or off,
u press the MENU button A.
u Press the "Display Settings" 7
softkey.
04.07.2008 10:17:20 Uhr
101