Blaupunkt Bremen MP78 Mode D'emploi page 145

Adjusting the treble
For treble playback, you can adjust the level
and a High-pass fi lter.
u Press the MENU button A.
u Press the softkey "Audio Settings" 6.
u Press the NEXT button 2.
u Press the "Tweeter" softkey 6.
The display shows the selection between
"HighPass" (high-pass fi lter), "Phase"
(phase shift) and "Gain" (level).
To adjust the high-pass fi lter,
u Press the "HighPass" softkey ;.
The display shows the setting options
"Frequency" 6 (from 225 Hz to 10,000 Hz),
"Slope" 7 and "Characteristics" 8 each
with the current settings.
u
Press the corresponding softkey.
u
Select the desired setting by pressing
> or button @ (down) or
the
> or button @ (up).
u Press the OK button B.
To adjust the phase shift,
u press the "Phase" softkey 7.
u
Adjust the desired value by pressing
> or button @ or
the
button @.
To adjust the gain,
u press the "Gain" softkey 6.
u
Adjust the desired level by pressing the
> or button @ (down) or
@ (up).
or
02_BREMEN_MP78_gb.indd 145
When you have fi nished making your
changes,
u press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Adjusting the middle
For middle playback, you can adjust the
level and a frequency range. The frequency
range for the middle can be restricted by
a high-pass fi lter and a low-pass fi lter. The
high-pass fi lter is used to defi ne the lower
cut-off frequency, the low-pass fi lter the up-
per cut-off frequency.
u Press the MENU button A.
u Press the softkey "Audio Settings" 6.
u Press the NEXT button 2.
u Press the "MidRange" softkey 7.
The display shows the selection between
"HighPass" (high-pass fi lter), "LowPass"
(low-pass fi lter), "Phase" (phase shift) and
"Gain" (level).
To adjust the high-pass or low-pass fi lter,
u press the "HighPass" softkey ; (high-
pass fi lter) or "LowPass" : (low-pass
fi lter).
> or
The display shows the setting options
"Frequency" 6 (HighPass: 40 Hz –
10,000 Hz, LowPass: 225 Hz – 10,000 Hz),
"Slope" 7 and "Characteristics" 8 each
with the current settings.
u
Press the corresponding softkey.
>
u
Select the desired setting by pressing
> or
the
> or button @ (up).
u Press the OK button B.
Enhanced sound settings
button @ (down) or
145
04.07.2008 10:17:32 Uhr