Clock – Time
Clock – Time
Adjusting the time (Time
Setting)
u
Press the MENU button A.
u
Press the "Clock Settings" softkey ;.
The "Clock" menu is displayed.
u
Press the "Time Setting" softkey 6.
The "Time Set" menu with the currently set
time is displayed. The hours are highlight-
ed. If the time is displayed in 12-hr mode,
"AM" or "PM" appears behind the time.
To switch between hours and minutes,
u
or button >.
press the
To adjust hours or minutes,
u
button @.
press the
or
When you have fi nished making your
changes,
u
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Selecting the 12/24-hour clock
mode (24 H Mode)
u
Press the MENU button A.
u
Press the "Clock Settings" softkey ;.
The "Clock" menu is displayed.
u
Press the "24 H Mode" softkey : to
activate or deactivate the 24-h mode:
•
: The time is displayed in 24-h
mode.
•
: The time is displayed in 12-h
mode.
128
02_BREMEN_MP78_gb.indd 128
When you have fi nished making your
changes,
u
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Displaying time permanently
with device switched off and
ignition switched on (Off Clock)
u
Press the MENU button A.
u
Press the "Clock Settings" softkey ;.
The "Clock" menu is displayed.
To display the time when the device is off
and the vehicle ignition is on,
u
press the "Off Clock" softkey 7:
•
: The time is displayed.
•
: The time is not displayed.
When you have fi nished making your
changes,
u
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Note:
You can replace the factory-selected
wallpaper of the time display with your
own. For further details, please read
the section "Changing wallpapers of
the display" in the chapter "Adjusting
the display settings".
04.07.2008 10:17:27 Uhr