Information On Product Disposal - Elite RAMPA Mode D'emploi

EN
• Use with narrow tyres or with non-optimum
tyre pressures can permanently damage the
Elastogel roller.
• Pay attention to the pressure between tyre and
roller: tighten the plate adjustment screw three
complete turns from when the roller touches the
tyre. If the tyre still slips on the roller, tighten
the screw another turn and make the pressure
on the pedal more progressive. Training with the
tyre slipping will permanently damage the Ela-
stogel roller and the tyre.
• Do not keep the Rampa in wet or damp places.
• For less tyre wear and better grip on the roller,
it is advisable to use tyres of 23 mm width.
• Recommended rear wheel pressure: 7 - 8 atmo-
spheres for racing tyres; 3.5 - 4 atmospheres for
MTB tyres. For particular cases, comply with the
pressure recommended by the tyre manufacturer.
• For quieter use, better grip of the tyre on the
roller and reduced vibration, use slick tyres (also
for Mountain bikes).
• Before use, clean the tyre with alcohol or water.
1) WITHIN THE EUROPEAN UNION
This product conforms with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE.
The crossed bin symbol given on the equipment or on the packaging indicates that at the end
of its service life the product must be collected separately from other waste.
Therefore at the end of its useful life the user must take the equipment to an appropriate
centre for the differentiated collection of electronic and electrotechnical waste, or return it to
the dealer when purchasing a new product of equivalent type.
Adequate differentiated collection for subsequent sending of the scrapped equipment to recycling, tre-
atment and environmentally-friendly disposal can help prevent possible negative consequences for the
environment and the health of people and favours the resume and/or recycling of the materials from
which the equipment is made.
Improper disposal of the product by the user could involve penalties as specified by the regulations in
force.
2) IN NON-EU COUNTRIES
If you want to dispose of this product, please contact your local authorities and ask them what disposal
method applies.
20
ADVICE:

INFORMATION ON PRODUCT DISPOSAL

This could damage the electronic components.
• Use the trainer on a level surface.
• The conformity of the Rampa to the Council
Directives (ref. "Declaration of Conformity" at
page 50) could be compromised if not used with
the supplied power adaptor (Ref. G).
• If the pin of the quick release supplied protrudes
more than 3 mm from the fixing nut, cut off the
protruding part (Pic. 36).