Information On Product Disposal - Elite TURNO Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
PACKAGING
If the roller needs to be shipped, careful packaging
is critical.
Pack up the Turno in its original box. During
shipments, packs often undergo mistreatment and
very hard impacts, therefore inadequate packing
can result in permanent damage to the roller. This
type of damage is not covered by the warranty.
ATTENTION
• Put old batteries in the special
containers
• Do not disperse in the environment
• If the battery is replaced with one
of the wrong type there will be risk of explosion
NOTES
When placed close to a TV, radio or electric motor, interference can occur that may alter the correct
transmission of data. Avoid using the device within a 1.5-meter radius
of other electronic equipment.
Do not use with other wireless devices, which can alter correct data transmission.

INFORMATION ON PRODUCT DISPOSAL

1) WITHIN THE EUROPEAN UNION
This product conforms with European Directives 2002/95/CE, 2002/96/CE and
2003/108/CE.
The crossed bin symbol given on the equipment or on the packaging indicates that at the end of its ser-
vice life the product must be collected separately from other waste. Therefore at the end of its useful life
the user must take the equipment to an appropriate centre for the differentiated collection of electronic
and electrotechnical waste, or return it to the dealer when purchasing a new product of equivalent type.
Adequate differentiated collection for subsequent sending of the scrapped equipment to recycling,
treatment and environmentally-friendly disposal can help prevent possible negative consequences for
the environment and the health of people and favours the reuse and/or recycling of the materials from
which the equipment is made. Improper disposal of the product by the user could involve penalties as
specified by the regulations in force.
2) IN NON-EU COUNTRIES
If you want to dispose of this product, please contact your local
USE & STORAGE CONDITIONS
The Misuro B+ sensor, like any other electronic device, needs to be handled carefully. It must not be
used in a wet and/or damp environment. When not in use, it must be stored in a cool and dry place.
Please remove the battery if you will not be using the device for a long period of time.Do not expose
the device to direct sunlight for a long period of time. Operating temperature: min -20°C, max 50°C.
NOTE: before sending the roller or any other
component assistance, always firstly consult Elite
or the distributor. Any items received without prior
agreement will be rejected
• Keep the battery away from children. Imme-
diately consult a physician should the battery be
swallowed.
• The roller is not waterproof. Please be careful of
sweat and do not use abrasive cleaners, as both
may damage the electronic circuitry.
• Do not store the roller in a wet or damp envi-
ronment that could damage its electronic compo-
nents.
EN
13

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières