Packaging; Information On Product Disposal - Elite DRIVO Mode D'emploi

- Use the Drivo trainer as described in the manual.
- Drivo is not equipped with an emergency brake.
- Drivo has been designed and manufactured to ensure
maximum safety of the user and/or third parties, but peo-
ple, children and pets should be kept away from the trainer
during use as contact with the moving parts of the trainer
and the bicycle may result in damage or injury.
- Never put your fingers or foreign objects of any kind
through the slots on Drivo, as there will be high risk of
damage to the trainer and/or serious physical injury.
- Before you start training, place the trainer in a suitable
location, away from any potentially dangerous objects (fur-
niture, tables, chairs...) so as to avoid any risk of accidental
or inadvertent contact.
- The Drivo is to be used by only single rider at a time.
- The max weight limit of the user is 113 kg / 250 lb in
accordance with the referenced norm EN 957-1 Class HC.
- Always check the safety and stability of the bicycle on
Drivo before training.
- No part of the product has any use beyond its original
application. The warranty will be void if the unit has been
opened or tampered with.
- Since the feet are made of soft non-slip material, they
may leave traces of rubber on the floor during use.
- If the trainer needs to be shipped for technical support
and/or any other reason, it must be shipped in its original
box. Damage due to a failure to use the original packaging
is not covered by the warranties.
Note: before shipping your trainer or any of its parts for
technical support, you must first consult Elite or its di-
stributor or your dealer. Any items received without prior
agreement will be rejected
- Do not leave the charger plugged in while not in use.
- Do not store the Drivo in cold and damp places. This may
1) WITHIN THE EUROPEAN UNION
This product conforms with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE.
The crossed bin symbol given on the equipment or on the packaging indicates that at the end of its service life the
product must be collected separately from other waste.
Therefore at the end of its useful life the user must take the equipment to an appropriate centre for the differentiated
collection of electronic and electrotechnical waste, or return it to the dealer when purchasing a new product of equivalent type.
Adequate differentiated collection for subsequent sending of the scrapped equipment to recycling, treatment and environmentally-
friendly disposal can help prevent possible negative consequences for the environment and the health of people and favours the
resume and/or recycling of the materials from which the equipment is made.
Improper disposal of the product by the user could involve penalties as specified by the regulations in force.
2) IN NON-EU COUNTRIES
If you want to dispose of this product, please contact your local authorities and ask them what disposal method applies.

INFORMATION ON PRODUCT DISPOSAL

damage its electronic components.
- Use only the supplied charger.
- The Drivo compliance with EU laws (see "Declaration of
conformity", page 112) may be voided if a charger diffe-
rent from the original is used.

PACKAGING

If the roller needs to be shipped, careful packaging is
critical:
- remove the charger cable from the Drivo;
- unplug the USB key from the PC;
- put the cable and USB key in a humidity-free container;
- pack up the Drivo in its original box. During shipments,
packs often undergo mistreatment and very hard impacts,
therefore inadequate packing can result in permanent da-
mage to the roller. This type of damage is not covered by
the warranty.
Note: before sending the roller or any other component
assistance, always firstly consult Elite or the distributor.
Technical assistance:
Ph 0039 049 5940044
e-mail: real@elite-it.com
EN
41