C Ustomer Service And Warranty - Dynamic Master DMX300 CC Notice D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour Master DMX300 CC:
Table des Matières

Publicité

slanting position without the protective bell touching the bottom of
the pan as shown in the sketches opposite (2/3 of the way down the
tube).
N
ever use accessories not recommended by the manufacturer. They
may be a hazard for the user and may damage the device. Only use
original items and accessories.
CARE
T
he appliance can be cleaned using a sponge or a slightly damp cloth.
T
o clean the inside of the bell, run the appliance with the tube and its
bell in clean water for 3 seconds.
C
lean the stand in clean water using washing up liquid if necessary.
B
e carreful : risk of cuts when cleaning the mixer
attachment equipped with the blade.
N
EVER clean the appliance using a hose.
N
EVER immerse the motor block in liquid.
MAINTENANCE
I
t is preferable to regularly check:
T
-
hat the power cable is in good condition (the copper wires in
the cable should not be visible).
T
-
hat the tube is watertight (by visually inspecting the seal condi-
 

tion after having removed the blades).
T
-
hat the blades are sharp.
I
f the power cable is damaged, it must be replaced by the manufac-
turer, its after-selfs service or people of similar qualification to avoid
danger.
ELECTRIC REQUIREMENTS
T
he mixer of a class 2 category (double insulation) powered by a
single phase alternating current and does not require a "u" ground
plug.
T
he installation must be protected by a ground fault circuit breaker
and a 10 A calibre fuse.
U
se a standard 10/16 A single phased socket.
C
heck that the electricity supply voltage and the value on the mixer
specifications plate are compatible.
User guide - Master
CERTIFICATE OF CONFORMITY
CUSTOMER SERVICE AND
WARRANTY
T
his machine is in accordance with CE standards and :
C
ustomer service and warranty:
l
S
hould your unit require service, contact your distributor for the nea-
rest authorized service centre if you wish your unit to be serviced by
the manufacture ship it to :
CANADA SERVICE CENTRE DYNAMIC INTERNATIONAL LTD.
3227 boul. Pitfield
Saint-Laurent - Québec H4S-1H3
Toll free phone : 1-800-267-7794 - Toll free fax : 1-877- 668-6623
Local Phone : (514) 956 0127 - Local Fax : (514) 956 8983
USA SERVICE CENTRE DYNAMIC USA
1320 route 9 # 1352 - Champlain, NY - 12919
Toll free phone : 1-800-267-7794
Toll free fax : 1-877- 668-6623
DYNAMIC FRANCE S.A.S.
518 rue Léo Baekeland - B.P.57
85290 Mortagne-sur-Sèvre Cedex - FRANCE
Tél. +33 (0)2 51 63 02 72 - Fax : +33 (0)2 51 63 02 73
e-mail : contact@dynamicmixers.com
W
arranty:
l
Y
our new Dynamic product is warranted to the original purchaser,
for a period of one year, from the date of purchase. DYNAMIC war-
rants products to be free of manufacturing defects for a period of one
year from the day of original shipment, covering all parts and labor.
Damage caused by improper use, accident and/or abuse are not consi-
dered to be manufacturing defects. DYNAMIC will repair or replace, at
its discretion, defective products returned to an authorized warranty
repair center, freight prepaid one way. Unauthorized work on the pro-
ducts during the warranty period will void this warranty.
T
he portion below must be sent to the Service Centre within 10 days
from the purchase date.
EN
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Master dmx410Master dmx500Master dmx300 cc blenderMaster dmx410 blenderMaster master combi 410Master master trio 410

Table des Matières