Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
NOTICE:
•
If target radio shows Cloning Failed using
Wireless Cloning feature, try again with distance
of at least 1 ft away from source radio.
Over The Air Contact Cloning
Over the Air (OTA) Contact Cloning feature allows you to
add or delete contacts to or from another radio wirelessly
without connecting the radios by cable.
You can clone over either private, private group, or public
group while the targeted slave radio contact can be either
private or private group. OTA contact cloning feature is
enabled through Customer Programming Software (CPS)
configuration.
Cloned contact replaces the contact in the slave radio if the
existing contact has the same private ID, channel ID, or
same name.
If a contact is mapped to a channel and Direct Call,
removing the contact resets the channel to default channel
ID and name.
50
Contact Cloning Remote Add
1 Press the Menu/OK → Advanced → Cloning →
Contact Cloning → Remote Add.
The radio displays the contact list to be added.
2 Do one of the followings:
•
Scroll to select the contact and press Menu/OK.
•
To clone all the contacts in the master radio,
select All and press Menu/OK.
Radio displays the Remote Send to screen.
3 Scroll to the target contact and press Menu/OK.
Radio displays the Confirm Add? screen.
4 To confirm remote add, press Menu/OK.
If cloning takes more than 10 minutes, radio displays
Cloning takes <XX> min,OK?.
5 To continue, press Menu/OK.
If successful, radio displays Cloned Successfully.
Publicité
Chapitres
Table des Matières
