Manager Mode And Features; Remote Disable - Motorola Solutions DTR600 Mode D'emploi

English

Manager Mode and Features

Manager mode allows the supervisor to use the radio to
monitor and control the subordinate's radio.
The following features are available in the Manager mode
radios:
• Remote Enable and Disable
• Remote Monitor
This feature is enabled through Customer Programming
Software (CPS) configuration. Once enabled, radio shows
both the remote control features.

Remote Disable

Radios configured as Manager are able to disable a
working radio from functioning.
1 Press the Menu/OK → Advanced → Manager
Mode.
2 To disable the target radio, press Remote Disable
→ Menu/OK
The radio displays the contact list.
52
3 Scroll to the required contact and press Menu/OK.
If successful, the Manager radio displays a positive
mini notice.
If unsuccessful, the Manager radio displays a
negative mini notice.
Receiving radio displays Data Receiving
momentarily followed by power cycle, and then
displays Radio Disabled.
NOTICE:
The remote disable fails if the followings
happen:
• Target radio is out of range.
• Target radio is transmitting or receiving
data or call.
• Target radio is disabled or is powered
down.
• Manager radio records a wrong hopset of
the target radio.
A disabled radio can only power up, off, or
accept remote enable message.