Led Indicator Of Chargers - Motorola Solutions DTR600 Mode D'emploi

2 Insert the power cord plug into the dual pin
connector at the bottom of the MUC.
3 Connect the power cord into an AC outlet.
4 Insert the radio or battery into the charging pocket
with the front of the radio or battery facing the LED of
the MUC.
The charger LED flashes a few times to indicate the
current battery charge when the radio is inserted in
the tray rails. The light on the charger is red to
2
Normally, re-positioning the battery pack corrects this issue.
indicate that the battery is charging and turns green
indicates that the battery is fully charged.

LED Indicator of Chargers

The following table explains the LED Indicator shown on
the chargers.
Table 11: Indicators
Status LED Indicator
Power Green for approxi-
On mately one second
Charging Steady red
Charged Steady green
2
Error Fast-blinking red
English
Descrip-
tion
-
-
-
-
23