Cleaning The Sensor Dome; Maintenance - Thermador MASTERPIECE Série Mode D'emploi

Type of Soil
Metal marks: Iridescent stain
Hard water spots:
Hot cooking liquids dripped on surface
Surface scratches:
Small scratches are common and do not affect cooking.
They become smoother and less noticeable with daily use
of the glass ceramic cooktop cleaner.

Cleaning the Sensor Dome™

The sensor window on the Sensor Dome™ must always
be kept clean. Remove splattered grease and dirt
regularly. Use cottong swabs or a soft cloth with dish
detergent or glass cleaner, such as Windex® to do this.
NOTICE: Never use:
Abrasive articles like scrub sponges or scrub brushes
▯
Cooktop cleaners
▯

Maintenance

This appliance requires no maintenance other than daily
cleaning. For best results, apply cooktop cleaning cream
daily.
Possible Solution
Pans with aluminum, copper or stainless steel bases may
leave marks. Treat immediately after surface has cooled
with glass ceramic cooktop cleaner. If this does not
remove the marks, try a mild abrasive (Bon Ami®, Soft
Scrub® without bleach) with a damp paper towel. Rinse
and reapply glass ceramic cooktop cleaner. Failure to
remove metal marks before the next heating makes
removal very difficult.
Minerals in some water can be transferred onto the sur-
face and cause stains. Use undiluted white vinegar, rinse
and dry. Recondition with glass ceramic cooktop cleaner.
Remove boilovers and stains before using the cooktop
again.
Apply glass ceramic cooktop cleaner before using to
remove sand-like grains and grit such as salt and sea-
soning. Scratches can be reduced by using pans with
bases that are smooth, clean, and dry before use. Use
recommended glass ceramic cooktop cleaner daily.
NOTICE: : Diamond rings may scratch the surface.
21