Cook Time - Thermador MASTERPIECE Série Mode D'emploi

Cooking tips
Food frozen in blocks
Cooking foods that produce a
lot of water (e.g. fish fillet)
Foods that tend to produce a
lot of foam (such as noodles)
Thickening food
If food does not cook evenly
(e.g. potatoes)
No signal sounds

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
9
CAUTION
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
Setting the cook time
1. Select the desired element and power level.
Touch the TIMER key.
2.
heating element display.
Timer display.
&22.,1* )$67
352*5$06 35(+($7
   
ƒ  ƒ
Place the frozen block, e.g. spinach, in the pot. Add liquid according to the manu-
facturer's instructions. Put the lid on the pot. Select 70 °C as the temperature range.
Stir occasionally.
Cook with less water than ususal. Always cook with the lid on.
Cook with the lid on with foods that tend to produce a lot of foam. This saves
energy.
Cook the food that you are preparing at the recommended temperature range. After
adding the ingredients that will be used for thickening the food, thicken the liquid at
175-195 °F (80- 90° C).
Use more liquid the next time you cook that particular food.
Always put a lid on the pot. Then the regulating function will work best.
0
will appear next to the
‹‹
and min will appear in the
7,0(5
PLQ
    
 ƒ ƒ ƒ
3. Within the next 10 seconds, set the desired time using
the number keys. The timer begins to count down.
&22.,1*
352*5$06
 
ƒ
The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear an audible signal. The indicators 0
and will flash in the element display. Touch TIMER to
turn off the indicators.
Change cook time
Select the element. Touch TIMER and set the new timer
value using the number keys 0-9 or
Cancelling cook time
Select the desired element. Touch TIMER and select 0
from the number keys until the timer display is set to
0
the indicator will go out. The timer is now turned off.
Notes
You can set a cook time of up to 99 minutes.
▯
To program a cook time of less than 10 minutes,
▯
always select 0 first before you select the required
value.
After a power outage, the timer function will be
▯
cancelled.
)$67
7,0(5
PLQ
35(+($7
     
 ƒ  ƒ ƒ
 
@
and

ƒ
‹
A
.
‹‹
.
17