Booster Function; Usage Restrictions For The Boost Function; Switching The Boost Function On And Off; Cook Time - Thermador MASTERPIECE Serie Guide D'utilisation Et D'entretien

Booster function

With this function, your food is heated even more quickly
than with power level 9.0. The booster function briefly
increases the maximum output of the selected cooking
position.

Usage restrictions for the boost function

You can only activate the boost function once on the
right and left halves of the cooktop. If a second cooking
position is switched on or is already in operation, the
boost function will not be available or is deactivated and
the cooking position returns to power level 9.0.

Cook Time

With Cook Time, you can enable the cooking position to
switch off automatically after a set period of time.
CAUTION
9
Never leave the cooktop unsupervised, even
▯
when you have set a cook time. Boilovers can
cause smoke and foods and oils may catch fire if
left on high temperature settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off after each
▯
use.

Switching the boost function on and off

The cooking position must be selected.
Switching on: In the power setting screen, slide your
finger left until & appears in display. The function has
been activated.
Switching off: Slide your finger left to set another power
level. The boost function is deactivated. To switch the
cooking position off completely, slide your finger left until
0.0 appears in the display.
Note: Under certain circumstances, the boost function
may switch off automatically to protect electronic
components of the cooktop against overheating.

Setting Cook Time

The cooking position must be selected and a power level
must be set.
In the power setting screen, touch the Cook Time
1.
symbol . The Cook Time screen appears.
M
Slide your finger up or down to set the desired Cook
2.
Time in minutes.
13