Disassembling The Lift - Invacare Kirilos Manuel D'utilisation

Invacare® Kirilos / Atlante
1. Loosen the nut A and remove bolt B from the boom
mounting bracket C.
2. Place the actuator D or hydraulic pump E in the boom
mounting bracket C and align the holes.
3. Reinstall the bolt B and tighten the nut A.
Wiring
(Kirilos and Atlante Electric only)
10
1. Plug the hand control cable on socket A and motor
cable on socket B on the control unit.
2. Place the battery C on the control unit. Push the top of
the battery against the mounting bracket until there is
an audible click.

4.4 Disassembling the Lift

1. Put the base on a level surface so that all castors make
contact with the floor.
2. Lock the rear castors.
3. Reverse the relevant steps of the assembling procedure
for your model.
1551341-F