Hotpoint Ariston SJ 15 EU Mode D'emploi page 21

PARTS AND FEATURES
1. Feeding chute
2. Screw
3. Filter wiper
4. Filter
5. Juicing bowl
6. Pusher
7. Juice and pulp container
8. Container lid
9. Reverse button
10. Stop button
11. Start button
12. Cleaning brush
13. Juice filter
14. Sorbet filter
INTRODUCTION
Thank you for purchasing our product.
In doing so, you have opted for an effective high-
performance appliance.
The Slow Juicer is a new type of low-speed slow
grinder for fruit and vegetables. This new Juicer has
two separate outlets for the juice and the pulp. The
method of extraction is masticating and pressing,
using the screw-like screw much like a mortar
and pestle. The action tears open the food's cell
membranes and releases its deep-seated nutrients
and enzymes. It also releases more phytonutrients,
resulting in a richer coloured juice that retains more
vitamins and minerals. The slow revolutions per
minute ensure that it does not disrupt the cellular
structure of fruit and vegetables, eliminating oxidation
and separation. It consequently preserves the natural
form of precious enzymes and nutrients, even from
wheatgrass, soy and leafy greens.
If the instructions on the correct use of this appliance
are not observed, the manufacturer shall assume no
responsibility for any resulting damage.
The operating instructions may refer to different
models: any difference is clearly identified.
USING YOUR JUICER
ASSEMBLING THE JUICER
Before you assemble the juicer, ensure that the power
cord is unplugged and take care that the main juicer
body and all other parts are clean. See other details in
"Cleaning and Maintenance" section.
To assemble the juicer:
1. Assemble the filter wiper, the filter and the screw
(PICTURE A). Insert the filter wiper into the filter,
then place the filter fixing teeth into the bayonet
lock of the screw and rotate the screw until a
click is heard.
2. Place the main juicer body on the countertop.
3. Assemble the juicing bowl on the main juicer
body inserting the 3 pins on the main juicer
body into the 3 holes on the juicing bowl bottom.
Then place the screw/filter assembly into the
juicing bowl with a small rotation of it in order
to let the assembly engage with the motor shaft
(PICTURE B).
4. Place the juicer lid into the juicing bowl and then
rotate it until the safety lock on the back engage
the main juicer body (PICTURE C). If the juicer
lid is not in the correct position, the machine is
not able to work.
MAKING JUICE
Place the containers on both sides of the main juicer
body close to the pulp and juice chute.
Press start button to start juicing. Stop button will stop
the screw rotation that enable the juicing and reverse
button will invert the screw rotation direction until the
button is pressed. When the slow juicer gets stuck,
press the stop button, and then press the reverse
button to release the gear. Never press reverse button
while running normal without stopping. Never press
both start and reverse button togheter.
Introduce fruit and vegetables into the feeding chute
carefully pushing down the pusher to slowly feed items
into the juicing bowl. Do not press the food pusher
rapidly as the juicer will not be as effective. Do not
introduce other items until all fruit or vegetables
have gone through the juicer. Do not overload the
juicing bowl.
Do not juice hard fruit or vegetables, stones or hard
seeds.
The juice from the fruit and vegetables will flow directly
into the juice cup and the pulp will be collected in the
pulp container.
When juicing is complete, ensure that the screw is
stopped by pressing the stop button and the juicer is
unplugged. Now the unit can be disassembled safely
in the following order:
1. Remove the food pusher.
2. Remove the lid.
3. Remove the juice screw/filter assembly
4. Remove the juicing bowl
Regular maintenance and cleaning of your appliance
will keep it safe and in proper operational order. Refer
to "Cleaning and Maintenance" section.
it en
21