Correct Use; Cleaning And Maintenance - Hotpoint Ariston SJ 15 EU Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
further instruction. Do not attempt to change the plug yourself. This procedure needs
to be carried out by a qualified technician in compliance with the manufacturer's
instructions and current standard safety regulations.

CORRECT USE

• Turn the appliance off and unplug from the supply outlet when not in
use, before cleaning, assembly, disassembly or interacting with any
accessory.
• Do not leave the appliance unattended while is operating.
• This appliance has a built-in safety-lock, which ensures that you can
only switch the appliance on if you have assembled the juicer correctly
on the motor unit. When assembled correctly, the built-in safety lock
allows to use the product.
• Do not attempt to tamper with the cover interlock mechanism.
• Before juicing, make sure the pad is plugged-in completely to prevent
any leakage.
• Do not operate the appliance empty to avoid damaging it.
• Avoid contacting any moving parts and keep your fingers out of the
discharged openings and feeding tubes on the hopper.
• Do not use for more than 30 minutes.
• Do not put your hand or any other object in the food chute during
operation.
• Do not attempt to juice any hard materials, large seeds (seeds which
cannot be swallowed or chewed), pits, ice and ice cubes. Use frozen
food only wth the correct proportion of liquids and as suggested in the
dedicated section.
• If food gets stuck in the feeding tube, do not use anything other than the
recommended pusher.
• Do not push reverse button quickly from normal running mode, but wait
a few seconds in the off position.
• Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
• Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.

CLEANING AND MAINTENANCE

• The appliance must be disconnected from the power supply before
carrying out any cleaning or maintenance operation.
it en
19

Publicité

Table des Matières
loading

Table des Matières