Güde GMK 350 T Traduction Du Mode D'emploi D'origine page 8

GB
Do you have any questions? A claim? Do you need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy at our web pages www.guede.com in the Services part.
Please help us be able to assist you. To be able to identify your appliance when claimed, we need to know its serial No.,
order No. and the year of production. All these details can be found on the type label. Enter the details below for future
reference:
Serial No.
Tel.: +49 (0) 79 04 / 700-360
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved. Pictures are just for illustration
Marking:
Product safety:
Product corresponds to
appropriate standards of the
EU
Prohibitions:
General prohibition mark
Using the appliance when wet
prohibited!
Prohibition of further clothing
and jewellery
Warning:
Warning/attention
Keep safety distance
Commands:
Read the Operating
Instructions!
Wear safety gloves!
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
!!! Please read carefully the Operating Instructions
before putting the appliance into operation!!!
Order No.
Fax:
Do not touch rotating parts
Don't pull the cable
Beware of hazardous
voltage
Wear PPE (ear protection
aids, eye protection
Packing cardboard material
may be delivered to
collecting centres for
recycling
+49 (0) 79 04 / 700-51999
Any damaged or disposed
electric or electronic devices
must be delivered to
appropriate collection centres.
Package:
Protect against humidity
Technical data:
Engine power
Idle speed
average power
Weight
Appliance
Metal saw GMK 350 T
This metal trimming saw is an ideal tool to dry-cut any tubes,
sections and solids of steel (not high-grade steel),
aluminium, copper and PVC at an angle of 45° - 90°.
Appliance description (pic. 1)
1. Control handle
2. Safety switch
3. safety screen
4. Disk protection cover
5. Disk
6. Handle
7. Hand wheel
8. Rubber blocks
9. Lock device
10. Base plate
11. Brushes lid
12. Motor
13. Motor box
8
Year of production:
E-Mail: support@ts.guede.com
This side up
Connector
sawblade
Noise value