Presentation Of The Monitor; General Description; Operation Of The Buttons - SOMFY VSYSTEMPRO Origin RTS Manuel D'utilisation

EN

2.1 General description

The video monitor must be combined with at least one external module to visualise and talk to a visitor.
Depending on your installation, it also allows communication between two monitors.
This monitor is equipped with buttons which can be used to:
- answer or reject a visitor's call
- talk between several monitors in the same dwelling
- activate a motorised gate, an electric lock or other peripherals
- activate RTS Somfy products

2.2 Presentation of the monitor

Front panel
5
No. Description
1 LCD screen - 800 x 480 pixels
Communication and control buttons +
2
visualisation LEDs
3 Speaker
4 Microphone
5 RTS control
6 Removable terminal block 1
7 Removable terminal block 2
8 BUS line selector
9 Address switch (8 selectors)

2.3 Operation of the buttons

Operation of the RTS control (no. 5)
Open button: press briefly to open the relative product (roller shutter, awning, garage door, etc.) or to switch
the light on.
Stop button: press briefly to stop the relative product.
Close button: press briefly to close the relative product or switch the light off.
Selecting the channel: press the number of times required to activate the desired channel.
Note: channel 5 corresponds to 4 LEDs lit.
3
2 PRESENTATION OF THE MONITOR
3
2
4
Back of the front panel
1
6
16
17
11
12
13
8
3
No. Description
Multi-monitor
10
selectors)
11 Brightness setting thumb-wheel
12 Buzzer level selector
13 Conversation volume setting thumb-wheel
14 RTS control battery
15 RTS programming button (PROG)
16 Contrast setting potentiometer
17 Colour setting potentiometer
Copyright © 2016 Somfy SAS. All rights reserved.
7
15
9 10
14
configuration switch (4