Deleting The Favourite Position; Changing The Rts Control Battery; Monitor Settings - SOMFY VSYSTEMPRO Origin RTS Manuel D'utilisation

EN

4.2 Deleting the favourite position

[1]. Select the desired channel.
[2]. Press for 5 seconds.
[1]. Remove the monitor from its rear section (see 3.1 General information, page 5).
[2]. The remote control is on the right when you look at the rear of the monitor. Push the battery downwards using a
screwdriver.
[3]. Insert the new battery CR2430 in its housing by pushing it upwards until the end stop.
[4]. Return the monitor to its rear section (see 3.1 General information, page 5).
Please separate storage cells and batteries from other types of waste and recycle them via your local collection
facility.
11 Brightness setting thumb-wheel
16 Contrast setting potentiometer
17 Colour setting potentiometer
12 Buzzer level selector
Conversation
13
thumb-wheel
Note: do not alter the setting of the potentiometer to the le of potentiometer 16 (factory setting).
9

5 CHANGING THE RTS CONTROL BATTERY

6 MONITOR SETTINGS

Front panel
Perform a communication test with the external module. Turn thumb-
wheel 11 and potentiometers 16 and 17 until the image is displayed
correctly.
Perform a buzzer test, adjust the 3-position selector to the position that
suits you.
volume setting Perform a communication test with the external module. Turn the
thumb-wheel until the voice of the person speaking can be heard clearly.
Back of the front panel
17
16
11
12
13
Copyright © 2016 Somfy SAS. All rights reserved.