Using The Keypad; Keypad Lighting; Operation - SOMFY VSYSTEMPRO Manuel D'installation Et D'utilisation

EN

5.1 Keypad lighting

The kepypad is continuously illuminated by a series of LEDs.

5.2 Operation

Each user may use different colour codes to activate different equipment (see the guide at
the start of this document):
[1]. Enter the user code
[2]. Press "Enter"
If the code entered is valid, the green LED lights up for one second and the
corresponding relay is activated.
If the code entered is not valid, the keypad emits a little tune.
1 1 2 2 2 3 3 3
4 4 4 5 5 5 6 6 6
7 7 7 8 8 8 9 9 9
0 0 0
1 2 3
4 5 6
7 8 9
0
Note: when a relay is set to bistable mode, it is necessary to enter the user code again
followed by pressing "Clear" in order to deactivate it.
11

5 USING THE KEYPAD

1 2
4 4 4 5
7 8
2 sec.
0
1 2
4 5
7 8
0
3
6
9
3
6
9
Copyright © 2016 Somfy SAS. All rights reserved.