Daily Use; How To Increase Freezer Storage Capacity; Functions - Whirlpool B TNF 5323 W 3 Consignes D'installation, D'utilisation Et Sécurité

DAILY USE

HOW TO INCREASE FREEZER STORAGE CAPACITY

• Do not block the air outlet area (on the back wall
and on the bottom inside the product) with food
products .
• All shelves and pull-out baskets are removable .

FUNCTIONS

ON/STANDBY
SMART DISPLAY
404
• Removing the baskets to allow the storage of big
products .
• Placing the food products directly on the freezer
shelves .
• Removing additional removable accessories .
• The internal temperatures of the appliance may be
affected by the ambient temperature, frequency of
door opening, as well as location of the appliance .
Temperature setting should take into consideration
these factors .
• Unless otherwise specified the appliance accessories
are not dishwasher safe .
This function turns On/Stand-by
the refrigerator . To put the product
in Stand-by, press & hold the On/
Stand-by button for 3 seconds .
All the indicators turn off except
On/Stand-by icon back light to
indicate that the appliance is in
Stand-by .
This optional function can be
used to save energy . To activate
the Smart Display, press Fridge
°C and Freezer °C buttons at the
same time for 3 seconds until an
audible signal sounds .
When the appliance is in Stand-by,
the light inside the refrigerator
compartment does not work .
Remember that this operation
does not disconnect the appliance
from the power supply .
To switch the appliance On
again, simply press and hold for 3
seconds the On/Stand-By button .
To deactivate this function repeat
the same procedure . Remember
that this function does not
disconnect the appliance from
the power supply, but only reduce
the power consumed by external
display .