Section 4 − Specifications; Serial Number And Stock Number Location; Unit Specifications; Environmental Specifications - Miller D-74 MPa Plus Swingarc w/Drives Manuel Du Propriétaire

4-1. Serial Number And Stock Number Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

Type of Input Welding Power
Power Source Type
24 Volts AC
Constant Voltage (CV)
Single-Phase
DC With 14-Pin And
10 Amperes
Contactor Control
50/60 Hertz
Maximum Height With 4 ft
(1.2 m) Post
Vertical Lift Of Boom

4-3. Environmental Specifications

A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Temperature Specifications
Operating Temperature Range
14 to 104°F (−10 to 40°C)
Notes
OM-254063 Page12
SECTION 4 − SPECIFICATIONS
Wire Feed Speed
Range
Standard: 50 To 780 ipm
(1.3 To 19.8 mpm)
8 ft (2.4 m) Boom
13 ft (3.9 m)
Horizontal to 60°
Above Horizontal
Wire Diameter
Range
.023 To 1/8 in. (0.6
To 3.2 mm)
Max Spool Weight:
60 lb (27 kg)
12 ft (3.7 m) Boom
17 ft (5.2 m)
Horizontal to 60°
Above Horizontal
IP Rating
IP2X
Storage/Transportation Temperature Range
−4 to 131°F (−20 to 55°C)
Welding Circuit
Ship Weight
Rating
8 ft (2.4 m):
400 lb (181 kg)
100 Volts,
600 Amperes, 100% 12 ft (3.7 m):
Duty Cycle 410 lb (186 kg)
16 ft (4.9 m):
470 lb (213 kg)
16 ft (4.9 m) Boom
21 ft (6.4 m)
Horizontal to 60°
Above Horizontal
IP2X 2014−06
Temp1_016- 08